WE ARE EXPERIENCING HIGH ORDER VOLUMES WITH
LIMITED STAFFING MAKING ORDERS TAKE LONGER TO SHIP.  

WE ARE WORKINGNG TO FILL ORDERS AS FAST AS WE CAN.

PLEASE DO NOT CALL FOR FFL OR ORDER STATUSES.

IF YOU MUST CONTACT US PLEASE E-MAIL US AT INFO@KEARMS.COM  

Orders may take 4 weeks to ship. This notice takes precedence over all individual item statuses.



Search:

DMR Trigger Gen 3 Straight

DMR Trigger Gen 3 Straight - 1-50-01-572
DMR Trigger Gen 3 Straight - 1-50-01-572
Brand: KE Arms
Item #: 1-50-01-572
Availability: AVAILABLE
Price: $159.95
Pins:

SELECTOR:


Quantity:
Description

The DMR Gen 3 incorporates the full power hammer spring for reliable operation with hard primers, combloc ammo, and uppers that have firing pin safety springs.  

- 4.5 LBS single stage with adjustable reset
- Minimal takeup, overtravel and reset
- Precision EDM wired from A2 tool steel
- Melonite coated (Ferritic Nitrocarb)
- Simple drop-in installation

TRIGGER INSTALLATION INSTRUCTIONS

DMR Gen 3 Install Instructions

DMR Gen 3 triggers use the same D-Clips in the bushings to capture mil-spec fire control pins.

INSTALLATION INSTRUCTIONS FOR GUNSMITHS AND ARMORERS*
**ENSURE FIREARM IS UNLOADED**
1. INSERT DMR TRIGGER INTO LOWER.
2. INSTALL SELECTOR INTO SELECTOR HOLE. INSTALL SELECTOR DETENT AND SPRING, ATTACH PISTOL GRIP.
3. INSERT HAMMER AND TRIGGER PINS. FROM THE RIGHT SIDE OF THE RECEIVER SO THE NOTCHES IN THE PINS CATCH IN THE D-CLIPS IN THE LEFT SIDE OF THE HOUSING.
4. ADJUST TENSION SCREW UNTIL DESIRED RESET IS ACHIEVED.*
5. FUNCTION TEST RESET AND SAFETY BEFORE LIVE FIRE.
6. RE-CHECK TENSION OF SCREW DURING REGULAR MAINTENANCE INTERVALS.
7. CLEAN ENGAGEMENT SURFACES AND REMOVE DEBRIS FROM TRIGGER COMPONENTS DURING MAINTENANCE

*GUNSMITH INSTALLATION AND ADJUSTMENT IS RECOMMENDED