Threaded Barrel for Glock with Compensator
Item #: 1-50-27-005
Availability: IN STOCK
Will Ship in 1-4 Days
| Barrel/Comp Combo: || |
Threaded barrel for Glock with Compensator
Made in the USA
Melonite Coated Steel
Threaded 1/2-28 TPI
Flats are milled onto the threads for ease of securing compensators.
Comp attachment screws are included
Compensators are made from 7075 T6 aluminum billet and mil-spec hardcoat anodized.
By ordering this product you understand that you may need to tune your recoil springs and ammunition choice for reliable function.
Our testing shows that the 19 barrel can work with a stock recoil spring with the Carry Comp, and the Enhanced may require a lighter recoil spring. Some tuning with spring weights may be required in either case for optimum function with your combination of parts and ammunition
Our testing shows that the 17 barrel with Carry Comp requires a lighter spring, such as an ISMI 15 pound spring. The Enhanced comp will require even further lightening and load tuning to run reliably.
When installing the comp, leave a small gap between the comp and slide to insure proper function. The use of red locktite is recommended to secure the comp screws.
These barrels are drop in with KE Arms slides and most other slides. Some polishing/fitting may be required depending on your combination of parts.