9mm Pistol Compensator

9mm Pistol Compensator - 1-50-27-003
9mm Pistol Compensator - 1-50-27-003
9mm Pistol Compensator - 1-50-27-003
9mm Pistol Compensator - 1-50-27-003
Brand:
Item #: 1-50-27-003
Availability: IN STOCK
Will Ship in 1-4 Days
Retail: $79.95 Price: $39.95
Thread Length:


Quantity:
Description

These items are on clearance, all sales are final.  We will not be producing more.

We do not have a library of barrels here to check spacing on.  We cannot tell you which comp will look the best with your slide and barrel combo.

Worst case with the Short Thread models there will be more of a gap between the slide and comp than you want.

Worst case with the Long Thread models they will be longer than they need to be on your gun.


If you are uncertain which compensator to order, order the LONG thread models. LONG Thread will work on almost any barrel we have encountered. This short thread compensator requires shorter exposed threads/barrel to time properly.


MEASURE THE AMOUNT OF EXPOSED THREADS/EXPOSED BARREL ON YOUR GUN BEFORE ORDERING THIS PRODUCT! COMPARE IT TO THE DIMENSIONS BELOW!

For use on 9mm Pistols and Pistol Caliber Carbines Only

Pistol Compensators reduces muzzle flip making faster follow up shots easier.

If you are using a Compensator on a Pistol Caliber Carbine, it really wont do anything if your barrel is longer than ~9".  There isn't enough expanding gas past that point for it to actually work.  Muzzle devices on PCCs past 9" are essentially about picking which one you think is the best looking.

Single Port Short Thread Specs

  • Machined from 7075 Billet Aluminum
  • Type III Hard Coat Anodized
  • Threaded to attach to 1/2-28 TPI and is secured by 2 set screws.
  • 0.886" long x 1.005" Wide x 0.753" Tall
  • 0.233" relief on back of Comp before threads start.
  • 0.259" of threads

Single Port Long Thread Specs

  • Machined from 7075 Billet Aluminum
  • Type III Hard Coat Anodized
  • Threaded to attach to 1/2-28 TPI and is secured by 2 set screws.
  • 1.136" long x 1.005" Wide x 0.753" Tall
  • 0.233" relief on back of Comp before threads start.
  • 0.510" of threads

Double Port Short Thread Specs

  • Machined from 7075 Billet Aluminum
  • Type III Hard Coat Anodized
  • Threaded to attach to 1/2-28 TPI and is secured by 2 set screws.
  • 1.284" long x 1.005" Wide x 0.753" Tall
  • 0.233" relief on back of Comp before threads start.
  • 0.259" of threads

Double Port Long Thread Specs

  • Machined from 7075 Billet Aluminum
  • Type III Hard Coat Anodized
  • Threaded to attach to 1/2-28 TPI and is secured by 2 set screws.
  • 1.535" long x 1.005" Wide x 0.753" Tall
  • 0.233" relief on back of Comp before threads start.
  • 0.510" of threads

Depending on your loads and model of pistol a different recoil spring may be required for reliability. Test any combination of parts thoroughly before carry or duty use.