KE Arms DMR Trigger with Ambidextrous Selector

Brand: KE Arms
Item #: 1-50-01-515
Availability: AVAILABLE
Will Ship in 1-4 Weeks
Price: $169.95
SELECTOR:


Quantity:
Description

- 4.5 LBS adjustable reset
- Minimal takeup, overtravel and reset
- Precision EDM wired from A2 tool steel
- MELONITE Coated
- Simple drop-in installation
- 17-4 Stainless Steel heat treated shaft.
- Allen wrench included.

TRIGGER INSTALLATION INSTRUCTIONS

DMR Gen 2 Install Instructions

DMR Gen 2 triggers use the same D-Clips in the bushings to capture mil-spec fire control pins as our SLT-1 Trigger.

INSTALLATION INSTRUCTIONS FOR GUNSMITHS AND ARMORERS*
**ENSURE FIREARM IS UNLOADED**
1. INSERT DMR TRIGGER INTO LOWER.
2. INSTALL SELECTOR INTO SELECTOR HOLE. INSTALL SELECTOR DETENT AND SPRING, ATTACH PISTOL GRIP.
3. INSERT HAMMER AND TRIGGER PINS. FROM THE RIGHT SIDE OF THE RECEIVER SO THE NOTCHES IN THE PINS CATCH IN THE D-CLIPS IN THE LEFT SIDE OF THE HOUSING.
4. ADJUST TENSION SCREW UNTIL DESIRED RESET IS ACHIEVED.*
5. FUNCTION TEST RESET AND SAFETY BEFORE LIVE FIRE.
6. RE-CHECK TENSION OF ALL SCREWS DURING REGULAR MAINTENANCE INTERVALS.
7. CLEAN ENGAGEMENT SURFACES AND REMOVE DEBRIS FROM TRIGGER COMPONENTS DURING MAINTENANCE

*GUNSMITH INSTALLATION AND ADJUSTMENT IS RECOMMENDED

DMR Gen 1 Install Instructions

These instructions are for DMR Gen 1 Triggers that use tensioning screws for installation.

For instructions and downloadable image visit the Trigger Install Page.